GLABS Z4.28 AMPLIFIER

Output Power Stereo (RMS) – 4 * 3000W @ 8ohm

Output Power Stereo (RMS) – 4 * 4800W @ 4ohm

Output Power Stereo (RMS) – 4 * 7200W @ 2ohm

Bridge Mode (RMS) – 2 * 6000W 16ohm

Bridge Mode (RMS) – 2 * 9900W 8ohm

Bridge Mode (RMS) – 2 * 12600W @ 4ohm

Frequency Response – 10Hz-20KHz / ±0.35dB

THD+N (20Hz-20KHz) – <0.5% @ 801kHz

S/N Rate (20Hz-20 kHz) – >102dB

Crosstalk (1KHz) – >70dB

Slew Rate – >30ν/με

Damping Factor – >3000 (8Ohm) 20Hz to 100Hz

Voltage Gain – 47.5dB (0.775V:155V)

Input Sensitivity – 0.775V, 1V,1.4V,2V

Input Impedance – 10Κ Ω balance/ 20K Ω unbalance

Input Connectors – XLR Active balanced pin1 gnd/pin 2+/pin3

Output Connectors – 4 Neutrik NL4 Sockets

Protection – short-circuit, DC, overload, overheat, ultrasonic, RF, voltage peak limit

Operating Voltage – AC 110V-260V/50Hz-60Hz

Fuse – F-25A 2

Power consumption (Idle) – <175W

Power consumption (Max) – <11000W

Cicuit – Class D

Dimensions (L×W×D) – 500mm×483mm×45mm(1U)

Package (L×W×D) – 655mm * 630mm * 130mm

Net Weight – 13Kg

Gross Weight – 15.5Kg

 

Description

  • The GLABS Z4.28 delivers exceptional multi-channel power with 4 x 3000W RMS @ 8Ω, 4 x 4800W RMS @ 4Ω, and 4 x 7200W RMS @ 2Ω, making it ideal for large-scale professional sound reinforcement and multi-zone audio systems.
  • Bridge mode output offers flexible, massive power options: 2 x 6000W @ 16Ω, 2 x 9900W @ 8Ω, and 2 x 12600W @ 4Ω, providing the ability to drive high-demand subwoofers and speaker arrays with authority.
  • Provides a wide, accurate frequency response of 10Hz to 20kHz ±0.35dB, ensuring crisp and clear sound reproduction across the full audible spectrum.
  • Maintains low distortion with THD+N < 0.5% @ 801kHz, preserving high audio fidelity at elevated volume levels.
  • High signal-to-noise ratio of >102dB and excellent channel separation with crosstalk >70dB at 1kHz deliver clean, noise-free sound.
  • Fast transient response with a slew rate greater than 30 V/μs and a strong damping factor of >3000 (8Ω) between 20Hz and 100Hz provide precise speaker control and accurate bass response.
  • Features a voltage gain of 47.5dB (0.775V input to 155V output), with selectable input sensitivities at 0.775V, 1V, 1.4V, and 2V for compatibility with various professional audio sources.
  • Equipped with balanced XLR inputs (pin 1 ground, pin 2 positive, pin 3 negative) and an input impedance of 10KΩ balanced / 20KΩ unbalanced, ensuring reliable and noise-resistant signal transmission.
  • Outputs use 4 Neutrik NL4 speaker connectors for robust and secure speaker connection.
  • Comprehensive protection includes safeguards against short circuits, DC faults, overloads, overheating, ultrasonic noise, RF interference and voltage peak limiting, ensuring reliability in demanding environments.
  • Operates on a wide voltage range from AC 110V to 260V at 50Hz–60Hz, with two F-25A fuses for enhanced power protection.
  • Efficient Class D circuitry delivers high power with reduced heat dissipation, packaged in a slim 1U rack-mount chassis measuring 500mm × 483mm × 45mm.
  • Weighs 13 kg net (15.5 kg gross), balancing power, compactness and portability for professional touring and installation.

Reviews

There are no reviews yet.

Be the first to review “GLABS Z4.28 AMPLIFIER”

Your email address will not be published. Required fields are marked *